Pianos consistently make movers yearly list of items that are most regularly harmed. Grand pianos are particularly troublesome. Practicing the following treatments for taking apart, cushioning and packing grand pianos will avoid damage, lower claims cost, and enhance customer fulfillment.
1) At least 3 people are needed to manage a child grand piano. If the baby grand piano requires to increase or down stairs or if a full or concert grand piano requires to be transported, a minimum of 4 individuals are needed.
2) Always finish a accurate and extensive stock. It may be required or more effective to use a visual stock to effectively describe and reveal pre-existing damage.
3) As various parts are dismantled, please place all hardware in a correctly identified parts bag and after that position the parts bag in a "Components Box".
4) Get rid of the music rack (lyre) from its track by pulling it towards the keyboard. Wrap it in a tidy furnishings pad.
5) Detach the cover by getting rid of the hinge pins. Have someone wiggle the cover, holding it opposite the hinge, while a 2nd individual works the pin loose. Please beware not to harm the wood with the pliers or with the pin itself. If needed, cover the jaws of the pliers with a little cloth to help avoid damage to the wood. Wrap the lid in a tidy furnishings pad.
6) Remove the prop that holds the lid open and cover it in a clean furnishings pad. The prop has a hinge pin and remains in two pieces.
7) Eliminate the pedal assembly and wrap it in a tidy furniture pad. The braces at the rear of the assembly rest in slots at each end. When getting rid of the screws, please be cautious not to drop the braces. In addition, please be especially mindful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by placing a piece of masking tape with the proper number on each rod. Note: If masking tape is not available, please use properly labeled parts bags for this function. When reassembling at location, please make certain to put the rods in the appropriate order so that the pedals will work properly.
8) Pad the piano by positioning a clean rolled furniture pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to avoid it from flopping open while you manage the piano. Cover the top of the piano with 2 clean furniture pads, neatly folded around the keyboard. Use elastic band to protect the pads. Keep in mind: Please guarantee that the surface area of the piano is dust-free prior to padding it. Get More Information Padding an extremely sleek surface area that is dirty might cause great scratches, particularly on a black lacquer surface.
9) Position a piano board and connect the straps so that it is all set to get the piano. The raised brace on the piano board must be at the keyboard end of the piano.
10) Get rid of the left front leg by positioning one individual below the piano at the left end of the keyboard. Be sure to have two people raising the corner of the piano while the third individual removes the leg. Keep in mind: Please be sure to keep in mind which legs were eliminated from which positions given that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to lift the whole piano a little while completing this maneuver to prevent unnecessary pressure on the staying, connected legs as the piano suggestions. Lift the piano to an upright position on the board. Keep in mind: Please make sure that the soundboard is secure before lifting. Make sure that the piano is centered snugly against the brace at the end of the piano board. Note: Never leave the piano unattended. Always have at least someone holding the piano consistent at all times.
12) Get rid of the 2 staying legs and wrap them in clean furniture pads. These legs are kept in place by a "essential and slot" arrangement. To eliminate the leg, slide it inward toward the center of the piano till it comes out of the slot.
13) Protect the piano to the piano board by bringing the ends of the straps together and fastening them. Location folded burlap pads over the furnishings pads however under the straps to offer additional defense to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs for defense against residence damage, put the keyboard end of the piano toward the bottom of the stairs. Connect a bulge strap to the top end of the piano board to avoid the piano from slipping.
16) To load the piano, leave it on the piano board and location it in a tier as the first base product with the keyboard dealing with the wall of the preceding tier. The best location to load the cushioned cover is between the piano and the preceding tier or in between the piano and the wall.
Grand pianos represent a significant difficulty, they can be moved without damage by using typical sense and practicing the procedures noted above.