Pianos consistently make movers annual list of items that are most frequently harmed. Grand pianos are especially problematic. Practicing the following procedures for disassembling, padding and loading grand pianos will avoid damage, lower claims expense, and improve customer fulfillment.
1) A minimum of 3 people are needed to handle a child grand piano. If the child grand piano needs to go up or down stairs or if a complete or performance grand piano needs to be transported, a minimum of 4 people are required.
2) Always complete a extensive and accurate inventory. It might be needed or more suitable to use a visual stock to adequately explain and show pre-existing damage.
3) As numerous parts are disassembled, please location all hardware in a correctly labeled parts bag and after that place the parts bag in a "Components Box".
4) Remove the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a clean furnishings pad.
5) Detach the cover by getting rid of the hinge pins. Wrap the lid in a clean furniture pad.
6) Remove the prop that holds the cover open and cover it in a clean furnishings pad. The prop has a hinge pin and remains in 2 pieces.
7) Eliminate the pedal assembly and wrap it in a tidy furniture pad. When removing the screws, please be mindful not to drop the braces. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by positioning a piece of masking tape with the suitable number on each rod.
8) Pad the piano by placing a tidy rolled furniture pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from tumbling open while you manage the piano. Cover the top of the piano with two tidy furniture pads, nicely folded around the keyboard. Use rubber bands to secure the pads. Keep in mind: Please ensure that the surface area of the piano is dust-free before padding it. Padding a highly sleek surface that is dirty may trigger great scratches, especially on a black lacquer surface.
9) Position a piano board and attach the straps so that it is prepared to receive the piano. The raised brace on the piano board need to be at the keyboard end of the piano.
10) Remove the left front leg by placing a single person underneath the piano at the left end of the keyboard. The other two people ought to support see here the left front corner. The person beneath the piano must turn the keeping block so that the long end points far from the leg. The screws, if there are any, need to then be gotten rid of. The "below" individual needs to then get out from under the piano before actually removing the leg. Make sure to have two people lifting the corner of the piano while the 3rd person gets rid of the leg. Keep in mind: Please make sure to note which legs were removed from which positions because some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by decreasing the "leg-less" end onto the board. Please make certain to raise the entire piano a little while completing this maneuver to avoid undue pressure on the staying, connected legs as the piano suggestions. Raise the piano to an upright position on the board. Note: Please make sure that the soundboard is safe before raising. Make sure that the piano is centered comfortably versus the brace at the end of the piano board. Note: Never ever leave the piano ignored. Always have at least a single person holding the piano look at this site constant at all times.
12) Eliminate the two remaining legs and wrap them in clean furnishings pads. These legs are kept in location by a "crucial and slot" arrangement. To remove the leg, slide it inward toward the center of the piano until it comes out of the slot.
13) Secure the piano to the piano board by bringing the ends of the straps together and securing them. Place folded burlap pads over the furniture pads but under the straps to offer additional protection to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After sufficiently padding the stairs for defense versus house damage, position the keyboard end of the piano towards the bottom of the stairs. Attach a hump strap to the leading end of the piano board to avoid the piano from slipping.
16) To fill the piano, leave it on the piano board and location it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The very best location to website fill the cushioned lid is between the piano and the preceding tier or between the wall and the piano.
Although grand pianos represent a substantial obstacle, they can be moved without damage by utilizing common sense and practicing the treatments listed above.